| Subject | Text |
| dead tv | :D [b:e3f91b5754][i:e3f91b5754]disconnect the line op stage,remove the lopt or remove the supply to |
| LG RE-44SZ21RD Projection TV | Hi - can anyone help me with the fault on this LG RE-44SZ21RD Projection (lamp) TV.
The pictue has |
|
|
| Hi mariuss,
If I understand you correctly, you removed the zener diodes and now the camera function |
| power supply problem and what to replace? | hello,
I have a photographic enlarger with a voltage-controlled transformer. sometimes when i power |
| Sanyo PLC-SW20A projector picture as gone pink/purple colour | I have got a Sanyo PLC-SW20A projector and the picture as gone a pink/purple colour. The Lamp replac |
| use [email protected] I'll get you my personal one from there.
There is a temp sensor on to |
| :D you have a line op stage problem-remove the line op transistor and check it for sc-with the trans |
| Can't tell what is suppose to look like but you need to be able to see some sort of a pulse. Remembe |
| Thomson DSZ 644 DLP | I have a problem that tv automatically switch off after 1,5 hour and then switch on after 2 minutes |
| looking for, | i have a 50 inch hitachi projection lamp type t.v, model50VS69A the optical block is bad, does anyon |
| Welcome to the Board, Hugh. It is correct that the HOT doesn't appear to blow when the set is powere |
| Need Schematic for a NEC PlasmaSync 4210W | Need Schematic for a NEC PlasmaSync 4210W
or service manual
the problem is that. when I turn the p |
| Did you try replacing the lamp? |
| heater lamp&fuse ( broken heater)
RESET:clear -interrupt -0-interrupt
and 14 start-15 start |
| Not familiar with the specific set but you are looking at it correctly provided there are no other e |
| KVX2982U Sony Trinitron TV | Hi, Thanks for the repsonse. Apart from the sky box and the ceiling lamp (and the TV of course), |
| Hi Dan,
I have dismantled the pop-up assembly and found a code on the lamp it is 19R. I did not f |
|
|
| Learning the curve... | [b:b3a96c42d5]I am an old tech, trying to catch-up with the new technologies
out there........
|
| Re: Sony KP-57WV600 Blue CRT driver board | [quote:a5cbb02da0="Bahdabing"]Hello everyone. My dad bought a KP57WV600 tv that had a known converg |
| Why don't you post a picture of the end of the lamp from the bottom. It may help.
Paul@justmanu |
| Re: jvc service manuals for free | [quote:99b66be02d="jims"]i have a wide variaty of jvc service manuals I can send to anyone who needs |
| I appreciate the quick responses. Normal LED action going on at this time. Unfortunately, I don't ha |
| I ordered a new board instead of replacing the lamp and resistor. I just installed it and as soon a |
| no picture on FUJITSU PDS4213E-H | Hello everyone
Need your help
My plasma FUJITSU PDS4213E-H dont work anymore only a black sc |
| ak19 | [b:d7090ddf95][i:d7090ddf95] :D firstl check the 2,2 ohms fusible for oc,(ew circuit),check c630 for |
| AC to DC to conserve energy, good idea or bad? | Will I conserve more energy by using a 120v AC 60watt reading lamp, or
a lamp that has a built in t |
| Re: Q4 & Q5 | [quote:baf2d3d647="URAD_Harvey"]Q4 is a 16
Q5 is a 26
talkingelectronics.com/projects/SurfaceM |
| technics sa eh 790 | Hello i have the above amp and the problem is that doesnt power on only std by lamp .
Any help? |
| Sony kv29ls30e. Dead. 11 flashing LED. | :( hello to everybody. this sony kv29ls30e its dead and when try to start the led flashing 11 times. |
| Sony kds60a2000 | I read that part of the book, but I guess my question is; is it possible for the lamp to turn on an |